Panasonic NN-TK81KCS 24-inch Stainless Steel Microwave Trim Kit - Compatible with 1.2 cu ft NN-CD87KS Microwave Oven | Perfect for Built-in Kitchen Installation & Seamless Appliance Integration

Looking for a space-saving solution in your kitchen? Convert your Panasonic 1. 2 cu ft. countertop microwave oven to a built-in model with the Panasonic NN-TK81KCS 24” microwave trim kit. This Trim Kit consists of the trim frame, an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out opening to give your kitchen a stylish look while freeing up precious countertop space. The Panasonic NN-TK81KCS Trim Kit is designed for use only with the NN-CD87KS Panasonic Microwave Ovens. For safety, unplug the microwave oven before attempting installation of the NN-TK81KCS trim kit. Installation of this trim kit requires basic mechanical and electrical skills and may be completed by the DIY homeowner or kitchen cabinetry professional. Proper installation is the responsibility of the installer. The microwave oven must be used with a properly grounded 3-prong receptacle in compliance with the National Electrical code, as well as any applicable local regulations. Also refer to the microwave oven operating instructions for other safety and electrical requirements. This trim kit is only compatible with Panasonic Microwave Ovens.

Stainless Steel 24” Microwave Trim Kit compatible with Panasonic 1.2 cu ft HomeCHEF 4-in-1 Multi Oven NN-CD87KS

Trim Kit Outer Size – 596mm or 23-1/2” (W) 410mm or 16-1/8” (H) 20mm or ¾” (D)

Required Cabinet Opening – 600mm or 23-5/8" +/- 2mm or 5/64” (W) 395mm or 15-9/16" +/- 2mm or 5/64” (H) minimum 533mm or 21" (D) and minimum 850mm or 33 7/16” from the floor

Compatible Microwave Oven – Designed for use with the Panasonic NN-CD87KS. For safe use of your oven, do not alter or modify any part of this kit or oven

Tools Needed for Installation - Measuring tape, pencil, Phillips screwdriver, Ø 2 (5 /64") mm drill